This Sampo S1 product NPA00054 is an upgraded version of the original product NPA00013. This new product´s read accuracy has been improved.
Nordic ID Sampo S1 is a mountable UHF RFID reader with adjustable reading range. It is equipped with a light sensor and a tapping sensor, which can be used for triggering the reading. The GPIO connector allows connecting external peripherals. Nordic ID Sampo S1 has three external antenna ports (except model NPA00001-EU), which enables expanding the reading coverage.
RF Power: Module +27 dBm (500mW) / Integrated ant. ERP +30 dBm (1W) / AUX output +27 dBm (500mW)
• Integrated antenna
• High Performance UHF RFID
• GPIO connector
• Three external antenna ports expand the reading coverage
• Included in the box: Mounting Kit (screws, plugs) and USB Y-cable
TECHNICAL SPECIFICATIONS
| UHF RFID | Supported standard | ISO 18000-63 (EPC Class 1 Gen2 V2) |
| AES authentication in accordance with ISO/IEC 29167-10 supported | ||
| Frequency band | ETSI 865.6–867.6 MHz or FCC/IC 902–928 MHz | |
| Regulatory | CE ETSI EN 302 208, CE ETSI EN 301 489, FCC part 15.247 | |
| IC RSS-210, Safety IEC 60950-1 | ||
| Typical reading speed | 200 tags / sec in DRM mode | |
| Nordic ID Sampo S1 radiated power | Adjustable in 1 dB steps
Integrated standard antenna variant: +30dBm (1 W) ERP Integrated low-gain antenna variant: +20dBm (100mW) ERP Integrated near-field antenna variant: +27dBm (500 mW) ERP External antenna ports: +27dBm (500 mW) |
|
| Integrated antenna features | Integrated standard antenna variant:
-8 dBic circular polarized -Beam width: 80° -Nominal reading distance: 5 m (16 ft) Integrated low-gain antenna variant: -2 dBic circular polarized -Beam width: 80° -Nominal reading distance: 1.5 m /5 ft Integrated near-field antenna variant: -2 dBi near-field optimized antenna -Nominal near-field reading distance: 0– 20 cm / 0–8 inches) -Nominal far-field reading distance: up to 2 m / 6.5 feet) |
|
| External antenna port | 3 pcs. 50 Ω / SMA Female (optional) | |
| USER INTERFACE | Signals and indicators | LEDs: Power, RFID on, RFID read and Communication
Buzzer for sound indications Light sensor and tapping sensor for triggering reading |
| CONNECTIVITY | LAN
PAN |
Bus powered USB 2.0 device (appears as a serial port) |
| GPIO (optional) | 4 inputs, opto isolated, max. 24V
4 outputs, opto isolated, max. 50mA |
|
| POWER | External Power Supply | USB |
| Operating Power | USB only version: 3 W | |
| SIZE AND WEIGHT | Dimensions | (W) 200 x (L) 260 x (H) 25 mm ((W) 7.9 x (L) 10.2 x (H) 1.0 inch) |
| Weight | 540 g / 19.0 oz | |
| ENVIRONMENT | Operating Temperature | -20 to 55 °C -4 to 130 °F |
| Storage Temperature | -40 to 85 °C -40 to 185 °F | |
| Environmental sealing | IP20, for indoor use only (IP case available as accessory) | |
| INCLUDED | Included in the box | Mounting Kit (screws, plugs) and USB Y-cable |
